VTSA-F-FB-AP

Feature                                                                                                                                        

value

Electrical control

AP interface Fieldbus

Electrical l/O system

yes

Terminal type

45

Protocol

AP

Type of mounting

Direct mounting via through-hole On H-rail via accessories

On mounting frame

Screw-clamped

With through-hole for M5 screw with accessories

With through-hole for M6screw with accessories Via through-hole for M5 screw

Via through-hole for M6 screw

Max.number of modules

15

Mounting position

Any,on H-rail:horizontal

Operating medium

Compressed air to ISO 8573-1:2010[7:4:4]

Note on operating and pilot medium

Lubricated operation possible(in which case lubricated operation will always be required)

Ambient temperature

-5℃...50℃

Note on ambient temperature

observe ambient temperature derating according to IEC61131-2:2017

Storage temperature

-20C...60℃

Relative air humidity

5-90%

Non-condensing

Nominal altitude of use

(=2000m ASL(>79.5kPa)

Max.installation height

3500 m

Note on max.installation height

>2000 m ASL(79.5 kPa)

Observe ambient temperature derating according to IEC 61131-2:2017

Degree of protection

IP65

Note on degree of protection

Unused connections sealed

Corrosion resistance class CRC

0-No corrosion stress

Protection against direct and indirect contact

SELV/PELV power supply units required

Pollution degree

2

Operating pressure

-0.09 MPa...1 MPa

Operating pressure

-0.9 bar...10 bar

Pilot pressure

0.3 MPa...1 MPa

Pilot pressure

3 bar...10 bar

Operating pressure for valve terminal with internal pilot air supply

0.3 MPa...1 MPa

Operating pressure for valve terminal with internal pilot air supply

3 bar...10 bar

Feature

Value

Operating pressure for valve terminal with internal pilot air supply

43.5 psi...145 psi

LABS(PWIS)conformity

VDMA24364-B1/B2-L

CE mark(see declaration of conformity)

To EU EMC Directive

In accordance with EU RoHS Directive

CE marking (see declaration of conformity)

To UKinstructions for EMC To UK RoHSinstructions

KC mark

KC-EMV

Approval

RCM trademark

Note on materials

RoHS-compliant

Free of halogen

Free of phosphoric acid ester

Valve terminal structure

Modular,valve sizes can be mixed

Max.number of valve positions

32

Max.number of pressure zones

16

Type of actuation

Electric

Valve function

2x2/2-way,monostable,closed

2×3/2-way,monostable,closed

2×3/2-way,open,monostable

2×3/2-way,open/closed,monostable 5/2 double solenoid

5/2-way,bistable,dominant 5/2-way,monostable

5/2-way,monostable,safety function 5/3-way,pressurised

5/3exhausted 5/3 closed

5/3-way,port 2 pressurised,4 exhausted

Design

Piston gate valve

Valve size

65 mm

Pilot air supply

External

Internal

Max.standard nominal flow rate

7001/min at 18mm

13501/min at 26mm

1860 I/min at 42 mm 2900 I/min at 52 mm 40001/min at 65 mm

Suitability for vacuum

yes

Exhaust-air function

Via throttle plate

pneumatic working port

G1/8

G1/4

G3/8

G1/2

1/8 NPT

1/4 NPT

3/8 NPT 1/2NPT  QS-6

QS-8

QS-10

QS-12

QS-14

QS-16

QS-5/16 QS-3/8  QS-1/2

Signal status display

LED

Note on fieldbus interface

All information that is relevant to CPX-AP can be read out via the Ethernet interfaces/fieldbus connections and changed depending on the function.

Auto MDI,the bus module performs a crossover check

Firmware update via Ethernet interface/fieldbus interface &M function according to PNO is supported.

Based on the Ethernet protocol IEEE 802.3

Fieldbus interface

Ethernet

Feature

value

Field bus,protocol

ACD (Address Conflict Detection)

DLR(Device Level Ring)

EtherCAT®

EtherCAT CoE

EtherCAT Distributed Clocks(DC)

EtherCAT EoE

EtherCAT FoE

EtherCAT Modular Device Profile(MDP)

EtherNet/IP

EtherNet/IP QoS

EtherNet/IP Quickconnect

LLDP

MRP,MRPD(ring redundancy)

Modbus/TCP(Modbus/UDP)

PROFINET FSU

PROFINET I&M0..3

PROFINET IRT

PROFINET RT

PROFINET shared device S2 system redundancy

SNMP

Fieldbus interface,function

Bus connection incoming/outgoing

Field bus,connection type

2x socket

Field bus,connection system

M12x1,D-coded to EN 61076-2-101

RJ45 to IEC 61076-3-117(V14)

SCRJ to IEC 61754-24-21

Field bus,connection pattern

2...8

Field bus interface,electrical isolation

yes

Field bus interface,transmission rate

100 Mbit/s

Max.address volume,inputs

4096 Byte

Note on inputs

EP:488 bytes

Modbus:4096 bytes

Max.address volume,outputs

4096 Byte

Note on outputs

EP:496 bytes

Modbus:4096 bytes

Internal cycle time

<1ms

Configuration support

EDS file

ESl file

GSDML file

IODD file

Power supply,function

Incoming electronics/sensors and load and functional earth

Power supply,connection type

Plugs

power supply,connection system

7/8“to NFPA/T3.5.29

M12x1,L-coded to EN 61076-2-111

M18x1

Push-pull to IEC61076-3-126

Power supply,number of pins/wires

4….5

Note regarding operating voltage

SELV/PEIV fixed power supplies required

Note voltage drop

Nominal operating voltage DC

24V

Note on nominal operating voltage DC

Protected Extra-Low-Voltage to IEC60204-1

Permissible voltage fluctuations

+/-10%

Nominal DC operating voltage,electronics/sensors

24V

Permissible voltage fluctuations for electronics/sensors

±25%

Max.power supply

8A...16A

Typ.intrinsic current consumption at nominal operating voltage for electronic system/sensors

40 mA....10000 mA

Typ.intrinsic current consumption at nominal operating voltage,load

3 mA...10000 mA

Power failure bridging

10ms

Potential separation between the supply voltages electronics/sensor technology and load/valves

Yes

Reverse polarity protection

yes